Flat Trailers

We manufacture trailers from 16ft in length. We have a standard range of trailers and from this base we provide a wide variety of options and are therefore able to meet most customer requirements. Every Stewart trailer is designed and built to order. All of our trailers are fabricated to a very high quality standard and we pay great attention to detail in our designs.

We specialise in trailers for use with high speed tractors; these trailers are fitted with an air braking system and ABS. Stewart fast-tow trailers may be registered with the Department of Transport and MOT tested.

Design Features

LED Front Marker

LED Side Marker

Suzie Stalk

• Steel extrusions are shotblasted and primed prior to fabrication to remove mill scale and ensure a good surface for paint adhesion.
• Axles are used well within their design capacity, not on the limit e.g. 80mm axles are fitted to our 10 tonne capacity trailers but are commonly used on other manufacturers 12 tonne capacity trailers.
• Four spring suspension is standard.
• The side rave is an 8mm steel angle (not pressed steel plate) for strength.
• 28mm Keruing floor is standard.
• Standard trailer width is 2500mm (approximately 8’2”).
• Commercial road lighting system: The trailers are fitted with Rubbolite® lights and the wiring is connected at waterproof junction boxes.
• Trailers are fitted with LED front and side marker lights.
• There is a stalk fitted at the front of the trailer to keep electric and braking cables tidy and away from the drawbar and dirt.
• The electric connection to the tractor is a removable electric coil.
• Trailers are finished with 120 microns of paint, applied with an electrostatic system to ensure complete coverage. The top coat is a hard wearing polyurethane high gloss paint.
• Trailers are fitted with a 600mm headboard, a ratchet style park brake, rope hooks and spray suppression flaps as standard.